Adding a controller to a project

Once the project is created, the first thing you need to do is add controllers to it.

Attention! If you are using Enterprise or Personal cloud server, make sure that the controller is registered before adding it to the project! How to do this is described in the documentation: Registering a controller .

The controller is connected to the smart home server, but it is not used anywhere yet. Let's go to the first tab Projects and add the first project.

Let it be climate control . After adding the project, click on the Connect button and a list of all the project controllers will open. Then click on the Add button.

In the window that appears, specify the conditional name of the controller, its IP address in the local network, in our example 192.168.88.150. If you are using a local server, then the router field does not need to be filled in, and if a cloud one, then select the appropriate router. If everything was done correctly, the path field will be displayed in green with the full address of the controller via the VPN tunnel. Click Save and the first-born appears in our list of controllers.

To check the connection with it, click on the Controller Service button. The window that opens should display the first basic information about it.

At this point, the connection to the server is complete and you can proceed to the project settings and setting automatic operating modes.