Registering the controller

In order for the smart home server to lay a route to the controller, it must be registered . This action is required only if you are using a cloud server. If you are using a local server, then you do not need to register the controller, immediately proceed to the next step - adding the controller to the project.

Important . The easiest way to register the controller is in automatic mode. How to activate it in the router is described in the documentation: Activating API access .

Open the smart home server and go to the Routing section. In the router line, click the Access to router button and specify access to it: login and password.

Please note that for security purposes, this data is not stored on our server. It is stored in the browser and is deleted from it after it is closed, or if you click the Reset password button. If everything was done correctly, the access button will turn green.

Click on the plus symbol at the beginning of the line; in the window that opens, in addition to the VPN connection settings, a list of your controllers will appear.

Let's add a new controller, for example its IP address will be 192.168.88.150 .

Once you edit its address , the system will automatically suggest its port . Each controller must have its own unique port, so we recommend not to change it without special need. Click Save and our controller is connected to the server.

Конроллер успешно зарегистрирован ! Теперь Вы можете выполнить следующий шаг: добавление контроллера в проект .